Skip to main content

Vibration Avante

Comments

3 comments

  • Cheryl Duncan

    Ewillhite,

     

    Check and see if the area you are having problems is where the table joins together.  If this is where the problem is you will need to take the rails apart and make sure there are no burrs on the couplers.  If your retailer put your table together you may want to call them and let them know you are having problems.

    If you are going to try and do this just follow the instructions for putting the rails on in reverse order to remove them.

    Also make sure your quilt top is not over tightened on the poles.  This  can cause a bouncing.

     

    Best regards,

     

    Cheryl Duncan

    Handi Quilter Studio Educator

     

    0
  • Cathy Schmieder

    My machine is vibrating and shaking no matter where I am on the track. Regardless if I am going front to back or side to side.

    0
  • ewillhite

    I took it in for service and it is no better than it was $300 later, they said it was not the frame no burrs it is level I have no idea what it is but very frustrating

    0

Please sign in to leave a comment.

Powered by Zendesk