Prostitcher Premium

Liza Anne Lee

• February 11, 2019 23:36

How do I use Modify Reposition Current?   I have tried it and it doesn't seem to work...or at least work the way that I would think it would work....like setting the starting point to my current needle position.

0

• 

  Cheryl Duncan

  • February 12, 2019 16:38

  Liza Anne,

  When you are setting your Start point use Modify, New Start point.  This will move the Start point of your design to the  needle position.  If your thread broke or you ran out of bobbin and haven't lost your position then you can move your needle to the point you need to start quilting again and go to Pro-Stitcher, New Start/End, then press Start Auto.

  If you need further assistance you can contact your retailer or call our Education department.

   

  Best regards,

  Cheryl Duncan

  Handi Quilter Studio Educator

  0
• 

  Liza Anne Lee

  • February 12, 2019 18:31

  Thank you for that information.

  But I am still interested in what is the use for:  Modify, then Reposition, then Current?   I would like to be able to use that...just cannot find out how to get it to work.

  0
• 

  Cheryl Duncan

  • February 12, 2019 23:58

  Liza Anne,

   

  Current is grayed out now.  It is for possible future options.

   

  Best regards,

   

  Cheryl Duncan

  Handi Quilter Studio Educator

  0

Please sign in to leave a comment.